Please create an account to participate in the Slashdot moderation system

 



Forgot your password?
typodupeerror
×
Communications Iphone Music Software Wireless Networking Apple Hardware Technology

Apple Investigating Issue With AirPods Randomly Disconnecting During Calls (macrumors.com) 128

According to MacRumors, Apple is investigating multiple reports from iPhone owners of AirPods randomly disconnecting and reconnecting during calls. While the issue doesn't appear to be widespread, it appears to be a big enough problem to attract Apple's attention. One of the main reasons why the AirPods were so late to the market was because Apple needed more time to ensure the earpieces had reliable connectivity. Specifically, they were delayed to ensure both earpieces receive audio at the same time. MacRumors reports: A MacRumors forum thread and a long thread on Apple's Support Communities website have been generated by AirPods users who are regularly experiencing Bluetooth connection dropouts during phone calls, despite the fact that the wireless earphones almost never lose their connection when used to listen to music or anything else. MacRumors forum member protobiont wrote: "I've had this happen on two phone calls today. I am talking and suddenly the audio switches to the phone, I hear the Airpod connect tones and the audio switches back. This will repeat itself a few times, which is quite distracting during a phone call." At present, the issue appears to be limited to iPhone 6s and iPhone 6s Plus devices, with several users reporting no such problems after upgrading to an iPhone 7. MacRumors was also unable to replicate the problem on Apple's latest handset. Initial reports suggested the dropout issue only occurs if users also have an Apple Watch paired to their iPhone, but MacRumors was able to replicate the problem with a Fitbit Blaze, suggesting a more general conflict when other Bluetooth devices are also connected. Unpairing and then repairing the AirPods does not appear to solve the problem, neither does rebooting nor resetting the iPhone. Until Apple offers a solution, users are advised to use only one AirPod for conducting calls, as the dropouts only seem to occur when both earpieces are in use.
This discussion has been archived. No new comments can be posted.

Apple Investigating Issue With AirPods Randomly Disconnecting During Calls

Comments Filter:
  • by Anonymous Coward

    Most people will end up with a single airpod anyway.

  • wire (Score:5, Insightful)

    by fluffernutter ( 1411889 ) on Monday January 23, 2017 @08:11PM (#53725041)
    It would be nice if they could connect by a more reliable method such as a wire. Perhaps Apple could patent it.
    • by zlives ( 2009072 )

      that maybe too courageous for apple :)

      on the other hand blue tooth headsets have always been glitchy for me and other users i support. multiple brands plantronics, jabbra... what ever its just something i have learned to live with as the convenience factor for shedding the cable. so i am not surprised. according to TFA all you need to do is upgrade to the newest iPhone :)

    • Lasers. BIG, SHINY, F-ck-off lasers. Lasers that look like they could skin an ox.
    • Looks like Google already has a patent on screwing up wired headphones. Sorry.

      https://www.reddit.com/r/Nexus6P/comments/3vuwdx/headphone_jack_constantly_losing_connection/?st=iybc8j2o&sh=ee0e1b14 [reddit.com]

      Moneyquote:

      i would try this as well. i heard a lot of people having problems with music stopping because of this

  • Clearly (Score:1, Funny)

    by Anonymous Coward

    The people aren't holding the AirPods correctly.

  • ... not only should these not have connection problems, they should transcribe all conversations to a file for you.

    • ... not only should these not have connection problems, they should transcribe all conversations to a file for you.

      Many, many BT headsets, e.g. Samsung's, are much more expensive.

      • by gl4ss ( 559668 )

        Many, many BT headsets, e.g. Samsung's, are much more expensive.

        thats not really it though is it? samsung has bt audio sets starting from 50 bucks and going to the 250 range, at which point you get pretty decent over the ear design already...

        apple on the other hand sells what is essentially a worse version of samsungs cheapest offering at triple the price.

        of course you would want them connected at least to each other..

        • Many, many BT headsets, e.g. Samsung's, are much more expensive.

          thats not really it though is it? samsung has bt audio sets starting from 50 bucks and going to the 250 range, at which point you get pretty decent over the ear design already...

          apple on the other hand sells what is essentially a worse version of samsungs cheapest offering at triple the price.

          of course you would want them connected at least to each other..

          On what FACTS (as opossed to OPINION) do you base your "worse version..." Statement?

          So far, other than this call-drop glitch with certain phones, the vast majority of owners of the AirPods seem to enjoy them quite well, and they have gotten good to great reviews.

          • On what FACTS (as opossed to OPINION) do you base your "worse version..." Statement?

            He did extensive listening tests in his echo chamber.

            • On what FACTS (as opossed to OPINION) do you base your "worse version..." Statement?

              He did extensive listening tests in his echo chamber.

              Exactly.

      • My Brainwavez were 1/3 the price, and work very well.

        https://smile.amazon.com/s/ref... [amazon.com]

        Did you compare the Airpods to like devices, or to much better headphones?

  • with several users reporting no such problems after upgrading to an iPhone 7

    There you go... social inducted device obsolescence.
  • you are not holding it wrong ...your ears are misaligned!
  • by HockeyPuck ( 141947 ) on Monday January 23, 2017 @08:45PM (#53725237)

    This is an IRQ conflict... they should move the headset to COM1 and the cellular modem to COM3.

    • This is an IRQ conflict... they should move the headset to COM1 and the cellular modem to COM3.

      It might also be that QEMM is causing a conflict.

    • by Waffle Iron ( 339739 ) on Monday January 23, 2017 @09:51PM (#53725669)

      Those were the good old days... when setting the all the IRQ, IO port, DMA and address jumpers for the the expansion cards in a decked-out PC was like solving a soduku puzzle.

      • Those were the good old days... when setting the all the IRQ, IO port, DMA and address jumpers for the the expansion cards in a decked-out PC was like solving a soduku puzzle.

        Good times.....I used a plug-in card called the Discovery Card [google.com] to wrestle with IRQs. Best gadget ever back then...it had a bunch of LEDs that would light to help you determine what IRQ was in use for a given slot.

        I've still got it in a drawer but there's nothing with ISA slots still around that you could plug it into.

      • by sconeu ( 64226 )

        And then messing with HIMEM.SYS and DEVICEHIGH in your config.sys to fit all your drivers above the 640K line.

    • Re:Obviously... (Score:4, Informative)

      by MachineShedFred ( 621896 ) on Monday January 23, 2017 @10:45PM (#53725873) Journal

      You've got a low enough ID so this is probably part of your joke, but there's lots of others around here that won't follow:

      COM1 and COM3 both shared IRQ4.

    • by Jaegs ( 645749 )

      Man, I had forgotten those days. Thanks for the reminder, I think.

    • While you got modded +5 Funny and rightly so, I have to wonder how many people actually get this joke? Very few people even know what com ports and modems are, anymore.

  • by bmimatt ( 1021295 ) on Monday January 23, 2017 @08:54PM (#53725269)
    Just like Microsoft did in the 90's and 00's (and possibly still does now), Apple now uses paying customers to do the last round of testing for them. After they purchase the iGadgets. The recent MBP/iPhone port removal shenanigans will sure keep me riding my hardware to their last breath.
    • Just like Microsoft did in the 90's and 00's (and possibly still does now), Apple now uses paying customers to do the last round of testing for them. After they purchase the iGadgets. The recent MBP/iPhone port removal shenanigans will sure keep me riding my hardware to their last breath.

      It couldn't just be a minor, unforeseen compatibility issue between a non W1-equipped phone and the W1-equipped AirPods. No, if course not.

      Keep in mind that the problem is apparently NEVER exhibited when the W1-equipped AirPods are used with the W1-equipped iPhone 7. So, perhaps it is the PHONE that is having the issue (hopefully fixable in software), rather than in the AirPods themselves.

      • Looking at a teardown of an iPhone 7 [techinsights.com], we see the WiFi/Bluetooth chip is a Murata device, not a W1. The W1 is in the airpods, not the iPhone.
        • Looking at a teardown of an iPhone 7 [techinsights.com], we see the WiFi/Bluetooth chip is a Murata device, not a W1. The W1 is in the airpods, not the iPhone.

          Hmmm. That's interesting. I thought the iP7's had the W1, too.

          And what's a damn TRANSFORMER company doing making BT Chips?!? ;-)

          Well, then, that's actually even better news. That means that the issue with the call-drop is much more likely to NOT be related to a W1 to non-W1 incompatibility, as I first worried it was.

          • So, once again we see you taking extreme defense of Apple as your default position - and doing so without an ounce of knowledge of the facts. You can apologize to bmimatt for going off on him. His statement is pretty much 100% accurate; how do you roll out a product that is not compatible with a currently shipping product (being that you can still buy, brand new at the Apple store, iPhone 6s units)? It's called using your users for beta testers. You have four phones (iPhone 6s, 6s Plus, 7, 7 Plus) and o
            • So, once again we see you taking extreme defense of Apple as your default position - and doing so without an ounce of knowledge of the facts. You can apologize to bmimatt for going off on him. His statement is pretty much 100% accurate; how do you roll out a product that is not compatible with a currently shipping product (being that you can still buy, brand new at the Apple store, iPhone 6s units)? It's called using your users for beta testers. You have four phones (iPhone 6s, 6s Plus, 7, 7 Plus) and one pair of BT buds (airpods). It's not like it's millions of combinations...

              And isn't the percentage of failure quite small? So, is it small enough so that it simply didn't happen during Apple's initial testing? Especially since by FAR the greatest number of complaints [apple.com] are definitely coming from those who have the COMBINATION of iP6 or 6s AND an Apple Watch. In fact, there are a number of complainants that claim that their call-drop issues STOP if they completely un-pair their Apple Watch with their iPhone. Suggesting that there may be a race-condition between the phone and the wa

              • Yep, Apple doesn't sufficiently test an EXTREMELY limited number of combinations prior to releasing the product. Typically that is considered "beta testing by user". Which is what appears to be here. And you still haven't said anything back to bmimatt about your erroneous statements made on false data.
                • Yep, Apple doesn't sufficiently test an EXTREMELY limited number of combinations prior to releasing the product. Typically that is considered "beta testing by user". Which is what appears to be here. And you still haven't said anything back to bmimatt about your erroneous statements made on false data.

                  Ya know, I have finally come to the conclusion that it simply doesn't matter WHAT I say, you will continue to move the goalposts and minimize and distort my explanation to suit your Hater mindset.

                  Attempt at Communication Terminated.

    • by AmiMoJo ( 196126 ) on Tuesday January 24, 2017 @05:40AM (#53727035) Homepage Journal

      My guess would be that it drops on calls because the modem is active, pumping out a lot of RF energy. When signal is marginal the modem cranks up to the highest transmit power. It's on a different frequency to Bluetooth, but it still affects it, both from short range RF interference and noise on the power supply rails.

      Probably requires both poor signal and some specific cellular bands in the 2GHz region near to Bluetooth's 2.4GHz. Some LTE stuff is around 2200MHz.

      Of course this was bound to happen. Everyone knows that 2.4GHz is useless in some places due to the massive number of interfering devices. If you are in a Faraday cage like say a train or airplane with a bunch of other people who are also trying to use 2.4GHz because no-one's phone has a headphone socket any more and there is no cell signal so wifi is getting hammered... Well, it's not going to work very reliably, even if it does have an Apple logo on it.

  • by Falos ( 2905315 ) on Monday January 23, 2017 @08:56PM (#53725291)
    Waiting for the traditional batch of "mine works fine".
  • You're using your ears wrong.

  • I have had this happen when I was using the new Beats Solo3. I was on a call with them and then the audio drop to my iPhone and I heard the connect sound from the earphones. I took them off and completed the call on the phone. I suspect this will become a larger issue as time progresses unless Apple resolves the underlying issue.
    • by Trogre ( 513942 )

      The underlying issue needs to be sacked by the board of directors, but Apple is too courageous for that.

  • by globaljustin ( 574257 ) on Monday January 23, 2017 @10:25PM (#53725811) Journal

    Apple is so far up it's ass on this whole "it's all wireless in the future and the future is now" bullshit...

    Bluetooth is great, but battery life and size are often fatally problematic to the notion of "just get bluetooth headphones" is some kind of universal solution rendering headphones with cords (btw the headphone jack is also a *universally compatible data port*) obsolete and somehow justifying Apple's design strategy and marketing on these products.

    Let me address this now, people will definitely comment, "But I have used bluetooth headphones for years and the battery life and sound quality are sufficient"...that's great, but it's not evidence that proves this is a good design decision.

    Bluetooth headphones are caught between wanting to be as small as possible, have longer battery life, and not teathering them for convenience somehow (b/c then might as well use a cord!). It's what happens when you let marketing drive design, an obtuse impass where no solution is right. Wireless headphones with 8 hours of battery life is not enough for many, many users. For many various reasons. It really is noteworthy that the smaller they get the more they would benefit from cords, which are the whole thing they attempt to avoid.

    We are far, far away from wireless headphones being a de facto replacement for wired headphones such that we can just discard the headphone port.

    • (btw the headphone jack is also a *universally compatible data port*)

      This isn't true. It's far from universally compatible, with different implementations of squeezing things like remote control functionality into it, for instance.

      • Accessories like a Square credit card reader are absolutely universally compatible.

        The 4 pole headphone is universally compatible across all devices, unless device makers design their accessory specifically to be proprietary.

        Remote functionality on smartphone headphones is definitely possible and several headphones have 3 function control buttons that work with apple or android.

        • Right, so it's compatible until it isn't. The TRRS connector has many different implementations. Sometimes there's video in there. Sometimes the ground is in different places. Sometimes the microphone is in a different spot. There any many different ways of making a remote work. I've never seen a three button remote work with Android, but I've no reason to not believe you. However, the one I have doesn't work with the Android devices that I have.

          The thing is that the 3.5mm headphone connector is basically a

          • Right, so it's compatible until it isn't.

            Indeed...as is everything. This statement is a tautology.

            Sometimes there's video in there. Sometimes the ground is in different places. Sometimes the microphone is in a different spot. There any many different ways of making a remote work.

            Just because this may be true doesn't really mean anything. It's a benefit that it is so versatile, first of all. The ports worked. Square Card readers work for Apple or Android. Most after market headphones work for both.

            Wireless

    • by AmiMoJo ( 196126 )

      The sensible thing would have been to release the earpods along side a phone with headphone socket, and then if people were happy with them a year or two later get rid of the socket. But no, they had to ram those damn things up the customer's arse, to ensure good sales of their overpriced and somewhat defective earbuds.

      • The sensible thing would have been to release the earpods along side a phone with headphone socket, and then if people were happy with them a year or two later get rid of the socket. But no, they had to ram those damn things up the customer's arse, to ensure good sales of their overpriced and somewhat defective earbuds.

        Sorry that your dick falls off if you have to use the adapter. Most people don't have that problem however, so it's not a fucking problem for them.

    • by b0bby ( 201198 )

      Bluetooth is great

      I disagree. I often have problems with bluetooth devices. One JBL speaker I have works fine unless I start moving my phone around, the the audio gets funky. I just got a hands free kit for my car, at first it seemed to work fine but then the next time I used it the audio would judder every 20 seconds or so. And on and on. I really like it when it works, but it just doesn't work so much of the time.

      • I disagree. I often have problems with bluetooth devices

        this is true...in my usage bluetooth degrades quality and has other problems similar to what you mention

        I mostly skipped over bluetooth's problems because I didn't want to get bogged down with people missing my main point and just retorting in defense of *their* chosen bluetooth solution, which is "just fine"

  • I'm sure that just a dash of your famous 'courage' will magically make Bluetooth every bit as reliable as a piece of wire! It might have been nice, though, if you had instead demonstrated the courage to NOT favour fashion over function. But I guess indulging your vanity, while making your customers pay more for less standard and less reliable gear, was the more courageous choice. You old lionheart, you!

  • ...with my bluetooth connection in my car, and also at various times when I connect my Beats Pill. So I'd guess this has to do with bluetooth connectivity in general, and not specifically the AirPods. Fuck me, right?

  • Use only one airpod at a time? What, am I using it wrong? Or holding it in my ear wrong???

Love may laugh at locksmiths, but he has a profound respect for money bags. -- Sidney Paternoster, "The Folly of the Wise"

Working...