First time accepted submitter krouic writes Earlier this week Recon Instruments started shipping their long-awaited Recon Jet heads up display for sports, to real-life actual consumers.
Jet's core features are designed for the cyclist and runner, and allow automatic upload of stats to activity tracking services. They feature an on-board GPS generating real-time performance metrics, an on-board high definition camera for short videos and photos, Bluetooth, Wi-Fi and ANT+ for connectivity to 3rd party sensors for heart rate, cadence and power data and smartphone connectivity for caller ID, text messages and music player access and control. Initial review by DCRainmaker.

itwbennett writes: Called NailO, the prototype trackpad is similar to the stick-on nails sometimes used as a fashion accessory. It attaches to the user's thumb and can be controlled by running a finger over its surface. The processor, battery, sensing chip and Bluetooth radio are included on a circuit board that sits under the capacitive trackpad. The two are connected via a small ribbon cable, which means the trackpad is not quite as thin as a stick-on nail, but reducing the size is one of the aims of the researchers.

Jason Koebler writes: Researchers at Columbia University have designed a fully electric digital camera that powers itself using ambient light. Put in a well-lit room, it would work indefinitely. The camera's image sensor does double duty. It measures the light needed to make the photograph, and it also takes excess light and uses it to power a capacitor (it has no battery) that runs the camera (PDF). The research team says the technology can be used to create self-powered cameras that can live on the internet of things.

New submitter Analog24 writes: The QWERTY keyboard was not designed with modern touchscreen usage in mind, especially when it comes to swype texting. A recent study attempted to optimize the standard keyboard layout to minimize the number of swype errors. The result was a new layout that reduces the rate of swipe interpretation mistakes by 50.1% compared to the QWERTY keyboard.

puddingebola writes Microsoft has announced it will no longer manufacture Kinect for Windows. Only the Xbox One version will be available for purchase. Microsoft said it could not meet demand for the device, a strange claim for a company to make. The console version, though, will still work with Windows by way of a USB adapter, and as pointed out by this similar story at Gamespot, for about the same total price.

First time accepted submitter Legendary Teeth writes The makers of the Myo Gesture Control Armband (Thalmic Labs) have just released the specs for the Bluetooth protocol it uses. While there are already official SDKs for Windows, Mac, iOS and Android, this means that now anyone can roll their own support for other platforms like Linux or Arduino without needing to use one of the official platforms as a bridge. Anything you can write code for that that can act as a Bluetooth GATT client would now be possible, really. If you aren't familiar with the Myo armband, it's a Bluetooth Low Energy device with 8 EMG pods and an IMU that you wear on your arm. It can read your muscle activity to detect gestures you make with you hands, which you can then use to do things like fly drones, play games, or control music.

An anonymous reader writes A new article looks at the advanced technology that goes into many gaming mice favoured by professional gamers, from dedicated processors to custom weights for the sake of ergonomics, discussing the developments with designers at three top peripheral companies: Logitech, Razer and SteelSeries. Surprisingly, some factors that were once thought to have reached the limit of their usefulness, such as DPI sensitivity, are becoming more important again as screens get bigger and we make the move to 4K resolution. ... "With the rise of higher resolution screens, especially looking into 4K multi monitor systems and beyond, DPI might become an important factor in the future again, so we are not ruling out changes in the maximum tracking rate," says Razer CEO Min-Liang Tan.

An anonymous reader writes: After five years of service, my keyboard is dying, and I'm starting to look for a new one. Since it's for my primary machine, and I spend a lot of hours there for both work and leisure, I'd like to invest in a high-quality replacement. What do you recommend? I've been using a Logitech G15, and it worked well enough — but not well enough for me to buy another. (I've also heard Logitech's build quality has been on the decline in recent years — has that been your experience, those of you who own their recent hardware?) My use cases include coding and gaming, so durability is a big plus.

I'd prefer something a bit less bulky than the G15, which has a raised area at the top for media controls and a tiny screen. I don't mind a thicker bottom bezel so much. I'm not a huge fan of ergonomic/split keyboards, but if you know a really excellent one, I wouldn't rule it out. Same with mechanical keyboards — love the action, but the noise is an issue. I don't need any particular bells and whistles, but don't mind them. As for a budget... as I said, it's for a heavy-use machine, so I don't mind investing in great hardware. (That said, if I'm spending $150+, it better automatically make sure all my semicolons are in the right place.) So, what keyboard has served you well?

itwbennett writes Organizers of SXSW said this week that flying of drones is banned for safety reasons. 'The airwaves and/or frequency spectrums generally used in the remote control of drones are too congested during the popular event to ensure operation safe from interference,' they said in a statement. The Austin Police Department will be watching for drones in crowded or public areas and anyone flying one could have it seized, the organizers warned.

The K-Board won a "Best in Show" award at CES 2015. Plus, as Timothy said, "I always like pour and stomp demos." And it's totally cross-platform. If your computer, tablet or smartphone has a USB port and (almost) any kind of music software, it works. In theory, you could hook a K-Board to your Android or iOS device and use it to accompany yourself while you sing for spare change on a downtown corner. Or noodle around to get a handle on a theme you'll use in your next major symphony. Or...?

An anonymous reader writes: Face recognition software underwent a revolution in 2001 with the creation of the Viola-Jones algorithm. Now, the field looks set to dramatically improve once again: computer scientists from Stanford and Yahoo Labs have published a new, simple approach that can find faces turned at an angle and those that are partially blocked by something else. The researchers "capitalize on the advances made in recent years on a type of machine learning known as a deep convolutional neural network. The idea is to train a many-layered neural network using a vast database of annotated examples, in this case pictures of faces from many angles. To that end, Farfade and co created a database of 200,000 images that included faces at various angles and orientations and a further 20 million images without faces. They then trained their neural net in batches of 128 images over 50,000 iterations. ... What's more, their algorithm is significantly better at spotting faces when upside down, something other approaches haven't perfected."

An anonymous reader writes Thanks to the Oculus Rift DK2 VR headset and Activetainment B\01 VR bike, which pitches forward and back according to in-game terrain, has shifting, pedals, breaks, digital resistance control, and allows tilting into turns, users of the system feel like they're careening through a mountain biker's paradise. After working up a sweat in the simulator, the author of this article ruminates on whether or not his experience could be considered "real"; "Much of the feedback of actual mountain biking was present during my ride. Sure, the feedback could be more accurate, and there's still missing sensory information, like the wind through my hair and a certain set of forces on my body, but at what point is a virtual experience real enough to be well, real?"

New submitter mondalaci writes: This article is about building the Ultimate Hacking Keyboard step by step, starting with an Arduino. Lots of pictures and nerd talk included. It's a mechanical keyboard that can split down the middle and re-merge, and it has four layers of keymappings to keep the design compact. It will support custom keymaps as well. They're planning to release the firmware and design files under the GPLv3, and they're working on repair instructions, too.

An anonymous reader writes: We've often seen the term "uncanny valley" applied to the field of robotics — it's easy to get unsettled when robots act close to being human, yet fail completely in a few key ways. GitHub Engineer Zach Holman writes that we've now reached uncanny valley territory in speech recognition as well, though the results are more frustrating than they are disturbing. He says, "Part of this frustration is the user interface itself is less standardized than the desktop or mobile device UI you're used to. Even the basic terminology can feel pretty inconsistent if you're jumping back and forth between platforms.

Siri aims to be completely conversational: Do you think the freshman Congressman from California's Twelfth deserved to sit on HUAC, and how did that impact his future relationship with J. Edgar? Xbox One is basically an oral command line interface, of the form: Xbox (direct object). ...it's these inconsistencies that are frustrating as you jump back and forth between devices. And we're only going to scale this up."

An anonymous reader writes I buy massive collections of trading card games, Magic:The Gathering, Yu-Gi-Oh!, Pokemon, Weiss Schwarts, Cardfight Vanguard, etc, etc. And I've gotten the process fairly streamlined as far as price checking, grading, sorting, etc. Part of my process involves using higher-quality web cams positioned over the top of the cards which are in a stack. I keep a cam window on the screen to show a larger, brighter version of the card. What I'm wondering: Is there is an OCR solution out there that will look at the same spot on the screen, capture, ocr, dump to clipboard, etc.? I've tried several open source solutions but none of them quite fit my needs. What I'd really like is to be able to hit a hotkey, and have my clipboard populated with the textual data of the graphics in a pre-set x,y window range. All this should be done via a hotkey. I may be asking for a lot, but then again, I'm sure someone out there has had need of this type of set-up before. Anyone have any recommendations?

Iddo Genuth writes 2013 was the worst year for the photography industry in decades — but what happened in 2014 and will the upcoming blitz of cameras (including the super resolution Canon 5D S with 50MP sensor to be announced tomorrow) change everything in 2015? The official numbers published by CIPA (the Camera & Imaging Products Association) are out and they tell a story of a struggling photography industry trying to stay afloat in a sea of smartphones. Will it survive? This is the big question all of the photography manufacturers are facing over the past two years, and eventually what does it all mean for us as consumers? One thing that tiny phones lack, no matter their megapixel count, is the space for heavy glass or large sensors, which seems to leave a lot of room in the market even for small(ish) but dedicated cameras.

stephendavion writes A team of researchers from Columbia University have developed a device that can be plugged into a smartphone and used to quickly test for HIV and syphilis. The mobile device tests for three infectious disease markers in just 15 minutes by using a finger-prick of blood, and draws all the power it needs from the smartphone, Science Daily reports. The accessory costs an estimated $34 to make and is capable of replicating tests done in a laboratory using equipment that costs many thousands of dollars.

KentuckyFC (1144503) writes "Beauty is in the eye of the beholder. But what if the beholder is a machine? Scientists from Yahoo Labs in Barcelona have trained a machine learning algorithm to pick out beautiful photographic portraits from a collection of not-so-beautiful ones. They began with a set of 10,000 portraits that have been rated by humans and then allowed the algorithm to "learn" the difference by taking into account personal factors such as the age, sex and race of the subject as well as technical factors such as the sharpness of the image, the exposure and the contrast between the face and the background and so on. The trained algorithm was then able to reliably pick out the most beautiful portraits. Curiously, the algorithm does this by ignoring personal details such as age, sex, race, eye colour and so on and instead focuses only on technical details such as sharpness, exposure and contrast. The team say this suggests that any subject can be part of a stunning portrait regardless of their looks. It also suggests that "perfect portrait" algorithms could be built in to the next generation of cameras, rather like the smile-capturing algorithms of today."

This Listnr is "a new listening device connected to the cloud" being developed by a team in Japan that's currently running a Kickstarter project looking for $50,000 by March 7. The other Listnr "is a free music service helping people discover the best music from independent artists on Soundcloud and Bandcamp." More accurately, that's what it was, since their last Facebook post was in 2011 and their domain name is now for sale. Today's Listnr -- the listening device one -- claims it is able to tell whether a baby it hears is laughing, crying, gurgling or trying to talk. It is supposed to respond to finger snaps, hand claps, and other audio commands. It has an open API so that you can extend its use however you like. The company, too, is working on new applications for their product. Will there be enough of them, and will they interest enough people, to make this a success? Co-Founder Rie Ehara says, "We wanted to build something using sound to enrich and delight our lives." As of today (Feb. 2), Listnr is slightly less than halfway to its Kickstarter goal, so it's still a coin-toss whether or not Listnr will succeed.

You may have read a few weeks ago about the new materials that MakerBot has introduced for its 3-D printers; earlier this month, I got a chance to see some of them in person, and have them explained by MakerBot VP of Product Anthony Moschella in a cramped demo closet — please excuse the lighting — at the company's booth at CES. Moschella had some things to say about materials, timelines, and what MakerBot is doing to try to salvage its open-source cred, despite being a very willing part of a corporate conspiracy to sell boxes of Martha Stewart-branded extruder filament — as well as a few unremarkable things that the company's ever-vigilant PR overseer decreed Moschella couldn't answer on the record for reasons like agreements between MakerBot parent Stratasys and their suppliers. The good news for owners of recent MakerBot models: they'll be upgradeable to use the new and interesting materials with a part swap, rather than a whole-machine swap (it takes a "smart extruder" rather than the current, dumber one). And the pretty good news for fans of open source, besides that the current generation of MakerBots are all Linux-based computers themselves, is that MakerBot's open API provides a broad path for 3-D makers to interact with the printers. (The bad news is that there's no move afoot to return the machines' guts to open source hardware, like the early generations of MakerBots, but STL files at least don't care whether you ship them to an FSF-approved printer to be made manifest.)