Slashdot is powered by your submissions, so send in your scoop

 


Forgot your password?
Close
typodupeerror
×
Apple Businesses Science

MATLAB Survey for Mac OS X 48

Posted by pudge from the if-i-were-a-mathematician-yadda-dadda-dadda dept.
gsfprez writes "It's fairly simple: MATLAB wants to know if a Mac OS X port would be worth their while or not. I tell you what, I know a few engineering R&D organizations who'd have to reverse their anti-Mac IT decisions solely based on the idea that MATLAB would be available for Mac OS X because there could finally be high power, yet affordable, Unix machines running it."
This discussion has been archived. No new comments can be posted.

MATLAB Survey for Mac OS X More

MATLAB Survey for Mac OS X

Comments Filter:

  • Wonderful (Score:2, Insightful)

    by AsOldAsFortran ( 565087 )
    I plan to vote early and often for this.

    You can get Matlab for Linux - I run copies on RedHat - so the implication of the post that Matlab for Mac OS X would finally bring Matlab to Unix is a little strong.

    I have not bothered to purchase the current Mac Matlab version because it is stabilized at version 5 and has not been updated. I have found no reason to pay many $$ to Matlab for an obsolete version. But, a letter this spring from Mathworks indicated that my individual license will be converted to looser wording. Under it the license holder can install Matlab on multiple CPUS, under mutiple OSes, as long as the license holder is using them serially. This enables me to get the current Mac Matlab at no cost to supplement the Linux version. Now, if they update it to Mac OS X, I'd be very happy.

    • Re:Wonderful (Score:2, Informative)

      by EddydaSquige ( 552178 )
      I tried to vote early and often, but the survey looks like it will be conducted by phone and not the web. The survey link simply gives you a form to fill out you name, title, address, ect... And that's it, no other questions. So expect a call from marketing in the morning.

    • Re:Wonderful (Score:3, Informative)

      by softsign ( 120322 )
      You can get Matlab for Linux - I run copies on RedHat - so the implication of the post that Matlab for Mac OS X would finally bring Matlab to Unix is a little strong.
      You can get Matlab for just about any Unix (and it will run fine on a $1000 Sun Netra). So the implication by Mathworks that it would be difficult is bogus. Releasing a port that uses X would probably take them about one month. Using Aqua would probably take some more time. But with the rate of OS X adoption among engineers, they would be stupid not to pursue this.
    • I plan to vote early and often for this.

      Only do so if you are willing to spend significant cash money buying licenses. Remember what happened to a certain Linux games company? [slashdot.org] Lots of people said they wanted games on Linux, but no-one wanted to pay for them, and stuffing ballot boxes did no-one any favors in the long run.

      I haven't used MATLAB for years, but I have very fond memories of version 4 on AlphaStations.

  • Octave (Score:4, Informative)

    by DustMagnet ( 453493 ) on Thursday April 25, 2002 @08:39AM (#3408243) Journal
    There's always the open source alternative called Octave [mac.com]. It doesn't even require a license server, something I hate about matlab.

    • Re:Octave (Score:2, Informative)

      by EccentricAnomaly ( 451326 )
      Unfortunately Octave's plotting is horrible... and the main reason that I use Matlab is for its plotting.

      What we need is some good open source plotting libraries ....hmmm :)

    • Octave is not a true replacement for MATLAB (unfortunately). Octave has weaknesses in:

      - Generating publication quality graphics
      - Toolboxes
      - NetCDF I/O

      Unfortunately Matlab has weaknesses in

      - Memory mamagement
      - Working on Macs...

      Still, despite the price (not free) and other issues, the real matlab wins.
    • Dont knock octave, its a great tool. Unfortunately
      it hasnt been developed in a while i dont think.


      I'm a Mech. Eng. student at Cornell, we use a lot of Matlab, and I use it around here all the time. octave does like 80% of the stuff Matlab is used for, and is less frustrating to work with (loads faster, and matlab behaves weird from time to time)


      the thing is matlab has more functionality. As for performance, both Octave and Matlab are just fine for small/medium calculations, and neither can handle really big ones so it isnt much of an issue to me. Personally i think octave is nicer to script for (#!/usr/bin/octave -q). working in unix is much nicer and more flexible than windows (but at the cost of a steep learning curve, i guess)


      anyhow, what makes me use matlab is simulink and the gui/zoomer that comes up when you make plots, and its ability to interface with DAQ boards...


      perhaps if a more friendly plotter was added to octave it'd be pretty awesome. thats my two cents...

      -pete

    • I used Octave all semester for my neural networks class and did fine. Of course, when it came time to write my semester project, I chose to do it in Perl with PDL (Perl Data Language). My professor's response was, "There's no accounting for taste." :)

      Oh, and I did all this on a blueberry ibook with Debian Linux.

  • Math S/W (Score:2, Interesting)

    by showboat ( 205494 )
    I had to use matlab on Linux (RedHat) in a 2000-level math course last semester. Let me tell you, it wasn't fun. At least, what we had to do required more time and energy figuring out what's what than it should have. Granted, it was low-er level math; granted we didn't go far into the program -- but the thing was strangely designed. It's kinda like ms office: there are things in there that could be improved, interfaces made more consistent, to actually encourage productivity. No?

    I did like te console-ish interface of it, but it couldn't do everything you could do graphically, which is why I spent so much time with the poorly documented dialogs (unless it was an incomplete installation, but then not everything was left without help files).

    Anyway, another math prof was always talking about running these theoretical experiments on Maple, and suggested that we might need it for a class (didn't turn out to need it, thank God). I searched around and found that it (maple) had quite the vehement dislikers, who, incidentally, suggested free alternatives. It's been more than a semester since that, so I don't remember what they were. Anybody know of any free/open progs that can do the same thing... and maybe a tad more productively?

    • Re:Math S/W (Score:2, Interesting)

      by Circuit Breaker ( 114482 )
      Mathematica from Wolfram Research is far from being free, but is way ahead of MatLab in anything that matters (except market share ...)

      Python + Numeric + {Dislin/PyChart/...} do a decent job, much faster and much more flexibly.

      Octave supposedly gives Matlab compatibility (never used it myself).

      Matlab is more than 20 years old now, and showing it's age and Fortran ancestry (has been showing for at least 10 years). It's good at manipulating 2D matrices and applying some functions to them, but everything else is horribly slow, inefficient and unpleasant. Most of the reason it still dominates its market is that this is what people study with in the university, and later on, no one remembers how to do the Remez Exchange or IIR design procedure, so they go back to good old Matlab.

      • Re:Math S/W (Score:2, Interesting)

        by PoiBoy ( 525770 )
        I firmly disagree that Mathematica is "way ahead" of MatLab (or Gauss), especially when it comes to Matlab's core competencies such as matrix algebra and general-purpose numerical analysis.

        Although Mathematica certainly has far better symbolic capabilities, it is slower than molasses for numerical work. Moreover, Mathematica's programming language is terrible.

        Finally, even though Mathematica can do symbolic mathematics, for 95% of the mathematics that I do (I have a PhD in economics), a good understanding of algebra, a pencil, and paper provide useful results much more easily than Mathematica.

        IMHO, Mathematica is just a bloated piece of crap.

      • Matlab is more than 20 years old now, and showing it's age and Fortran ancestry (has been showing for at least 10 years). It's good at manipulating 2D matrices and applying some functions to them, but everything else is horribly slow, inefficient and unpleasant.

        Matlab is slow if you use loops... You should vectorize your matlab programs.

        Example:

        for i = 1:length(x),
        y(i) = x(i)*sin(theta(i));
        end

        is horrible slow, but can be easily vecotirzed as:

        y = x.*sin(theta);

        Vectorization takes a while to get the hang of, but is an incredibly powerful feature in Matlab that you'll learn to miss in other languages.

        Another good thing about matlab is that it's relatively easy to call fortran and C functions from matlab...

        Granted, Matlab is missing a lot of nice features of other languages, but it has many good strengths.

      • Re:Math S/W (Score:5, Informative)

        by b_pretender ( 105284 ) on Thursday April 25, 2002 @12:27PM (#3409661)
        Comparing MATLAB to Mathematica is like comparing apples to oranges.

        Mathematica offers a great symbolic algebra tool, a functional scripting language, a good plotting data visualization tools.

        MATLAB offers a great procedural scripting language, awesome array/matrix handling, and good plotting data visualization tools. Although, overall, MATLAB scripts run very slowly, when it comes to array/image manipulations, our best coders couldn't write C code that would perform as quickly as a well-written MATLAB script.

        I have extensive educational experience with Mathematica and extensive proffesional experience with MATLAB. One is good for some things the other is good for other things. For basic math projects or assignments, probably either tool is equally good, and tools such as Octave or SigmaPad are effective and free alternatives for MATLAB or Mathematica, respectively.

        MATLAB and Mathematica shine, however, when it comes to toolboxes. At Lockheed Martin, I used the Neural Network and Image Processing toolboxes extensively, and I was very happy with them. Also, MATLAB lends itself nicely to reprogramming your code in C, or using MEX wrappers to program in C or insert C code into MATLAB.

        Although I don't have much experience with Mathematica add-ins (except for the Statistics Toolbox), I imagine that they are also well written and efficient. I would guess that Mathematica would have better *analytical* toolboxes, whereas MATLAB would have better *numerical* toolboxes.

        • What is SigmaPad? I've never heard of it and a google search turned up nothing. A free alternative to Mathematica would be sweet...
          • I ment to say MuPad. It's not as good as Mathematica or Maple, but it's a close third. None of the other CAS packages are in the same category as these three (unless they use Maple as the engine).
      • You've obviously never had to use Simulink or Real-Time Workshop. Mathematica has nothing like this and it is the lifeblood of engineers.
        Python + Numeric + {Dislin/PyChart/...} do a decent job, much faster and much more flexibly
        I would like to see you write a script that will do 2D signal processing and plotting of the results in about 20 lines. I can do this in Matlab. Not only can I do it in about 20 lines of code, it will be blazingly fast if properly written to take advantage of Matlab's matrix capabilities. A lot of people make the mistake of writing Matlab code like they would C - lots of embedded loops, iterating over one variable. That's not how Matlab works and it usually results in awfully slow execution. Use matrices like they're supposed to be used and Matlab works like a champ.
        good old Matlab
        Exactly. Matlab is great for what it does. I can spend a few days designing and testing an efficient DCT algorithm, or, I can use Matlab. I can spend a few days designing and testing an efficient DWT algorithm, or, I can use Matlab. You see where I'm going with this...

        Not only that, but when I'm done with my simulation, Matlab has some pretty decent graphing capability. I don't need to waste my time handling spreadsheets full of data and trying to get a meaningful plot.

        • Re:Math S/W (Score:2, Informative)

          by Circuit Breaker ( 114482 )
          You've obviously never had to use Simulink or Real-Time Workshop. Mathematica has nothing like this and it is the lifeblood of engineers.
          Actually, I've had the misfortune to use Simulink. I had to simulate a non-linear multiple input/multiple output system, and I couldn't get Simulink to do it; So I turned to all the local experts who told me to use it in the first place, and once I described the problem to them, they said "Oh, of course you can't do that in Simulink". Granted, it was a very complex system, but that's why I needed modelling in the first place - I couldn't get an approximation any other way.
          I would like to see you write a script that will do 2D signal processing and plotting of the results in about 20 lines. I can do this in Matlab. Not only can I do it in about 20 lines of code, it will be blazingly fast if properly written to take advantage of Matlab's matrix capabilities
          With the exception of "import Numeric" and "import ", which I can hide away in a "Matpython" startup script, your 20 lines will probably work in Numeric Python with minor syntax tweaking and (unless you have no loops or unneeded copying, which is hard to get in Matlab) noticably faster. Numeric even uses the many of the names used in Matlab (which in turn copies some old fortran libraries) for most functions. But Python is significantly more capable - Let's see you do proper 4D signal processing with those 20 lines - I was able to do that in Python and I wasn't able in Matlab (that was why I switched at the time). It was Matlab 4, I think, and anything beyond 2D was hardly supported - perhaps things have changed.

          But one thing I know HASN'T change is Matlab's horribly inefficient scripting. I'm probably not representative, but I never seem to do anything "standard" with any tool - I usually find "standard" solution I'm content with without redesigning them (DCT, for example). I always do nonstandard things, usually nonlinear, and Matlab hasn't once given me a good surprise (and I gave it more than enough chance).
          A lot of people make the mistake of writing Matlab code like they would C - lots of embedded loops, iterating over one variable. That's not how Matlab works and it usually results in awfully slow execution. Use matrices like they're supposed to be used and Matlab works like a champ
          I'm not one of them. I've worked in languages (APL, Fortran) and environments (some IBM vector pipelines from 10 years ago whose name I can't recall, among others) that capitalized on vectorized access; I write vectorized matlab code. Unfortunately, sometimes it's the wrong thing to do.

          In one case, while trying to compute a three dimensional electrostatic field around a weird asymetric structure, I needed a matrix that contained, for each point in space, a distance from one of a set of given points. Doing this vectorized required multiple large intermediate matrices (think tens of megabytes), none of them sparse. When I debugged the matlab code on small matrices, it worked fine; When I went to the full size, it got a slowdown factor of 500 or so due to swapping. I rewrote this as a Matlab loop instead without any additional computation, and it was 5 times faster (100 times slower than anticipated if vectorizing didn't spill to disk). Writing the same loop in Numeric yielded nearly 20 times improvement. Not quite the vectorized result, but just 5 times slower than that (The code did many superfluous computations, which were unavoidable in vector form). I also converted the original vectorized version to Numeric, and it ran at exactly the same speed as Matlab.

          It was around that time that I stopped taking Matlab seriosly - Python/Numeric consistently outperformed it in any test, was easier to interface to C, and didn't have licensing hassle attached. It isn't as prettily packed, and you have to collect "packages"/"toolkits" yourself instead of relying on Mathworks to do that for you, but it has been more than worth my time to do so.
          Exactly. Matlab is great for what it does. I can spend a few days designing and testing an efficient DCT algorithm, or, I can use Matlab. I can spend a few days designing and testing an efficient DWT algorithm, or, I can use Matlab. You see where I'm going with this...
          Actually, I don't. Are you designing a new DCT algorithm, different from the Lanczos/Daniels, Sorensen or Winograd algorithms? Because doing so would take you days (if not months) in any environment. Are you designing a new DCT implementation? If Matlab saves you time, you should probably be spending time on something else - Matlab doesn't help you evaluate precision loss, limit cycles, saturation problems, etc. Is that DCT needed as a component inside something else? Then you aren't designing a DCT algorithm at all - the same way you call "dct2()" in Matlab, you could do that in C, Python, Fortran or Lisp.

          Regarding your DWT algorithm - you didn't really try to compute any interesting wavelets or any continuous ones lately, have you? Another area I have experience with and which I found Matlab severely lacking (And yes, I _was_ designing new wavelets, not just reiterating the standard families).
          Not only that, but when I'm done with my simulation, Matlab has some pretty decent graphing capability. I don't need to waste my time handling spreadsheets full of data and trying to get a meaningful plot.
          It has decent graphing capability, but nothing out of the ordinary. I used DISLIN, gnuplot, and various other packages through time; They're just as easy to use, some give matlab-quality output, and there are a few that give quality output, that I wouldn't be ashamed to publish in a referreed magazine (which I can't say about matlab output).

          The reply suggests, more than anything, that you've only used Fortran, C and Matlab - out of which Matlab is definitely the environment of choice for most design work. But there are a lot of other tools out there, and I have found them definitely worth my time. Check them out when you have the time.

          Personally, having a strong Prolog origin, I like Mathematica's syntax as well, and usually requiring weird things Matlab can't do efficiently, don't find it significantly slower than Matlab even for numeric work. But that's probably just me.
          • Well, I must say I vastly underestimated your experience with Matlab. Given the forum, I assumed you were just cheerleading for open-source software. Sorry about that (it's a gut reaction).

            Having said that, I think we can both agree that Matlab is a great tool for... shall we say... quick-and-dirty simulation/analysis. It IS convenient and it is up to the task in most cases (you say yourself that you tend to do stuff that's out of the ordinary). I wouldn't exactly call myself a power user, but for the type of stuff I've had to do with it (DSP mostly), it has been more than up to the task. Certainly, I have never considered writing my own simulation tools.

            As far as the plotting goes, Matlab does have some nice facilities built in and accessible to the casual user. If that's not enough, it can do vectored output (as can DISLIN and gnuplot), which means you can bring it through a package like Illustrator and produce true quality output with a little more effort.

            What would you recommend to someone coming from a Matlab background to use? I do most of my work on a Mac these days. If it really isn't that much different, I wouldn't mind giving it all a try. Particularly of interest to me would be the plotting stuff.

            • No problem; This reaction on /. is, in general, right.

              In the last few years I've been doing more managerial/administrative stuff than research stuff, so I can't offer much advice about the recently available tools. For me, Numerical Python + very infrequent C code + DISLIN for plotting won against Matlab everytime; YMMV.

              It really depends on what you want to get done - it is similar, but not similar enough to make you comfortable from the first minute. Python is a real programming environment that scales well, while still supporting quick-and-dirty prototyping - but it's still general purpose, so you may sometimes have to do things differently than in Matlab. The simple stuff is more or less the same (if not simpler), and the vector way of thinking carries over to Numeric (the Python part that deals with ... numerics).

              Find the right tool for the job; For me, Matlab has never been it, but for you it may.
      • I thought that Mathlab game with a crippled version of Maple and could interface with Maple. I seem to recall *way* back about 8 years ago it had this. I've only used Mathematica and not Maple, but my friends who use both generally prefer Maple.
  • Ok, I've been thinking of this for years, anyway: who wants to build a better math app/lib? Something cross-platform and easily usable in other apps (like, write a graphing calc in a few lines built on it). Or, once again, has such a thing been done to such a level? The state of the field is interesting, considering the number of people using it....
    • I want to build a better matlab... I've been looking at f-script [fscript.org] as a possible starting point. I'm learning Cocoa to try and see if I can do the plotting....

      I think math toolkits need to be open source, otherwise the work you put into it is tied to the fortunes of a particualr company that either might not be around or decide to stop supporting what you need (like mathworks deciding to stop supporting macs).
  • I sometimes need Matlab and have found a way to run it at home, well, sort of. The University of Washington's Math Sciences server has Matlab. I just ssh into the server from XDarwin and run matlab, it works just fine. Hey, I'm already paying for it through their license, I may as well use their copy. I wouldn't be surprised if most math departments at higher ed institutions had this.
    • Yep. I'm from Texas A&M and our math department does the exact same thing. Our general purpose unix server (as in everyone in the University has an account on, just people taking certain math courses have accounts on our math servers) has maple on it. The general purpose server use to have a copy of matlab, but I guess the license expired or something because it's not there anymore.
  • I tried scilab once, and found it very similar to MATLAB. Also I believe scilab is in the Fink distribution.
  • They already have Matlab for Mac OS 7/8 [mathworks.com], and for Linux [mathworks.com]. Unfortunately the linux version is x86 only, and I'm not sure whether OS X supports OS 8 applications. It doesn't look like they have a native PPC version.

Slashdot Top Deals

"Money is the root of all money." -- the moving finger

Close