Want to read Slashdot from your mobile device? Point it at m.slashdot.org and keep reading!

 


Forgot your password?
Close
typodupeerror
×
Technology (Apple) Businesses Apple Technology

Kai Staats of Terra Soft Chats About Rackable Macs 22

Posted by pudge from the computers-can-do-that dept.
iMacRobert writes "Mac Help Radio, Tuesday at 8 p.m. Eastern, will be talking live with Kai Staats, co-founder and CEO of Terra Soft Solutions, who will be talking about his company's new 2U Macs, the power of the PowerPC, and Yellow Dog Linux. Following Kai will be Anita Holmgren from Tenon Intersystems on Post.Office and iTools 6.5 for Mac OS X, which make running web-based services easier for the average webmaster."
This discussion has been archived. No new comments can be posted.

Kai Staats of Terra Soft Chats About Rackable Macs More

Kai Staats of Terra Soft Chats About Rackable Macs

Comments Filter:
  • When this gets re-posted tonight at 9pm-- after the event has occurred-- we can chat about what they said.
    Right now, this has been a test of the emergency broadcast system.
  • I hope someone brings up the issue of cost. It's too bad that such a premium needs to paid to get a Mac in rack form. Maybe since Apple doesn't seem inclined to produce their own rack Mac's they could grant a very limited license to some company to only produce said Mac's. This company could then just purchase the parts they need from Apple (motherboard, processor, ?) and therefore could keep costs/prices down since they wouldn't have to buy entire G4's and then throw half of the thing away.

    • I can attest to the need for less expensive rack-form Macintoshes. My day-job employer decided to pass on creating a massive Mac-based Linux cluster (1000+ machines), despite having one of the best cost to power ratios among all systems tested. One of the primary reasons was the form factor. We could cram way more processors into a rack using small ATX, (and later 1u black boxes) than with the beautiful but rack-hostile tupper-mac form factor. (We even toyed with building a wall of cubes, but they were just way too expensive!)

      I can think of three major areas that cry out for an inexpensive rack-mac solution right off the bat:

      Biotechnology/Bioinformatics
      Bio-scientists have a long history with the Mac, but it's getting squeezed out in many companies because of management's perceived cost-benefit of PC boxes. As we start needing to process larger and larger amounts of genetic information, the need for a small form-factor mac increases.

      Graphics/Video Production
      Rack-Macs are needed in this industry, especially when using a render farm for 3d graphics!

      Music Production / Performance
      Anyone using a Mac to run a keyboard rig or show has long wanted a Rack Mac. Powerbooks are now powerful enough to do much of what is needed, but I'd love to have a 1 or 2 space Mac that didn't suffer CD/DVD speed problems from being mounted sideways. I'd also love to be able to put the Mac in the studio machine room rack and not lose use of the CD/DVD.

      These are just a few examples, and yes, workarounds exist, but an out-of-the-box rack Mac solution (that didn't cost a premium) would be a great improvement!

    • apple does make rack mountable g4's they take up about 4 u's and you have to buy a little adapter to make them work in standard racks.. check out the g4 case lying on its side sometime.
  • Apple Relizes that this is a share of the market place that it is missing - and I believe Apple is making it there - slowly.

    3D - Market: Maya ported to Mac OS X
    and with Pixar's Render Man already available for Linux I do not believe that Darwin will be far behind.
    RenderMan [pixar.com]
    With the combination of Maya - Render Man - & Clusterable Darwin/ OS X machines (especially if thier low profile this puts Mac at the fore front of 3D rendering. I'm sure that Steve Jobs recognizes the demand for a setup such as this - as he is the CEO of PIXAR.

    For the scientific field Apple has released Genentech BLAST [apple.com] and there a slew of other programs being ported [apple.com] from unix to OSX.

    After observing Steve Jobs fro many years - you must realize that Jobs will not release a product until it is the most svelte & elegant thing in the market place.

    When Apple does release low profile - Rack CPU's they will be *insane*. IT organizations & Science reasearch labs will drool all overthemselves.

    But Jobs does not work on a normal time table:
    Recognize market - develop product for market - release.

    Jobs works more like this:
    Recognize market.
    Target specific areas in Market where the Mac can dominate, Think about that for several years.
    Add ram & 50Mhz increase to iMac line.
    Release software developing lust & desire for product line.
    Begin engineering new product.
    Take a nap.
    Add ram & 50Mhz increase to iMac line
    Scrap new product start over - with same deadline.
    Release new product at Apple Dev WORLD Expo with the famous line "Oh, & one more thing...."
    • PIXAR Renderman was natively standard within NeXTSTEP and Openstep. The latest versions of course withstanding solely based upon Steve's licensing issues- he owned both companies afterall.

      Does the stuff work within MacOS X? YES. Is it available for public purchase? NO.

      Business case need is the delay, not the technology.

    • Apple Relizes that this is a share of the market place that it is missing - and I believe Apple is making it there - slowly.

      I think you're right. Rumors on "Thing 2" (a rackmountable server) have been floating around for a while now.

      If I were Apple, I'd combine a 1U rack unit with a variation of Microsoft's Mira [theregister.co.uk]: a wireless display that can connect to any Mac in the vicinity. Add USB to the display (for keyboard and mouse) and you've got the coolest KVM switch ever.

      Oh, and there's a petition [petitiononline.com] underway, too.

    • :especially if thier low profile this puts Mac at the fore front of 3D rendering. I'm sure that Steve Jobs recognizes the demand for a setup such as this - as he is the CEO of PIXAR.

      Hmmm. I think that there is a chance that because Steve has experience with PIXAR, he may have looked at what a rackmount Mac could be and said, "well, PIXAR wouldn't buy them, so why release them?"

      It is possible that Apple hasn't figured out how to make rackmounts compelling.

  • What about the idea of a stripped down, super cheap rack box?

    Personally, I would use/buy several really cheap networked processor boxes for distributed rendering (3d, After Effects, FCP, etc.). It seems that it would work to make a box with a basic mobo, processor, tons of RAM and a nic (maybe a HD or firewire if necessary) - it would boot off the network and be remotely administered (both Apple strengths). If Apple can sell a G4 iMac for us$1300 with a screen and extra bells and whistles, they should be able to sell a box like I'm describing for us$800.

    If they were simple enough that you could plug one into your network and have After Effects or FCP recognize it immediately, then I think that there would be a market for people who need more rendering power NOW! Imagine that on Tuesday they realize that in order to finish a project by Friday, they could justify us$1600 for two extra rendering units and have them FedExed for the final rendering run starting Wednesday night.

    Maybe I'm wierd, but I would buy these 'processor boxes' just to be able to have work move along faster. (while my work doesn't justify the situation I outlined above, I would pop us$800 for an extra G4 processor for distributed rendering).

Slashdot Top Deals

Single tasking: Just Say No.

Close