U.S. District Judge Robert Lasnik issued a temporary restraining order Tuesday to stop the release of blueprints to make untraceable and undetectable 3D-printed plastic guns, saying they could end up in the wrong hands. Defense Distributed reached a settlement with the federal government in late June allowing them to freely publish the 3D files. NBC News reports: "There is a possibility of irreparable harm because of the way these guns can be made," he said. Congressional Democrats have urged President Donald Trump to reverse the decision to let Defense Distributed publish the plans. Trump said Tuesday that he's "looking into" the idea, saying making 3D plastic guns available to the public "doesn't seem to make much sense!" Eight Democratic attorneys general had filed a lawsuit Monday seeking to block the federal government's settlement with Defense Distributed. They also sought the restraining order, arguing the 3D guns would be a safety risk. Earlier today, Senate Democrats introduced two bills addressing 3D-printed guns. The first bill would make it illegal to publish 3D-printed gun blueprints. The second bill would require weapons to include at least one metal component with a serial number to make them traceable. Downloads of the 3D-printed gun blueprints have been suspended until Cody Wilson [the owner of Defense Distributed] reviews Lasnik's order. It is unclear how many times the blueprints were downloaded, but some news outlets say the online manuals have been downloaded thousands of times and posted elsewhere online.

hyperclocker shares a report: HP hopes to entice researchers with a $10,000 reward for finding vulnerabilities in printers. The tech giant revealed the new bug bounty program on Tuesday. The scheme, which is launching as a private bug bounty, is tailored specifically for HP printer hardware. While many of us use home printers simply for printing the occasional document or photo, in the enterprise, these devices are often found in a network. If there is a weak link in business networks, a single device -- whether it be a printer or smart air conditioning system -- can be exploited to compromise a wider network system.

Printers, especially if they are overlooked when it comes to firmware updates or upgrades, can become such avenues to exploit. According to research undertaken by Bugcrowd, "2018 State of Bug Bounty Report," endpoint devices are becoming a tantalizing target for threat actors, with a 21 percent increase in total endpoint bugs reported over the past 12 months. In partnership with bug bounty platform Bugcrowd, HP says it is the "only vendor" to launch a printer-only vulnerability disclosure scheme. Under the terms of the program, researchers can earn between $500 and $10,000 per legitimate find.

An anonymous reader quotes a report from Ars Technica: Twenty states announced Monday that they plan to ask a federal judge in Seattle to immediately issue a temporary restraining order against Defense Distributed, a Texas-based group that has already begun making 3D-printer gun files available on its DEFCAD website after a recent legal settlement with the US State Department. "After almost 18 months I was skeptical that there was anything else that this administration would do that would truly shock me, but they have," Washington Attorney General Bill Ferguson told reporters assembled in Olympia and by phone. "Frankly, it is terrifying... We think that it is important to put a stop to this right away and make it as difficult as humanly possible to access this information." The new lawsuit, which Ferguson explained will be filed "within hours," comes just one day after Defense Distributed voluntarily agreed to block IP addresses from Pennsylvania after that state's attorney general filed a similar motion in federal court there. "Pennsylvania is still suing and we are still responding," Defense Distributed's founder, Cody Wilson, told Ars. Preemptively on Sunday, Defense Distributed sued the attorney general of New Jersey and the city attorney of Los Angeles to stop those lawsuits, largely on First Amendment grounds.

In this new 20-state initiative, the Washington attorney general argued that the State Department settlement violated the Administrative Procedure Act and also infringed upon states' Tenth Amendment right to regulate firearms within their own states. Ferguson pointed out, for example, people convicted of domestic abuse are flagged when they attempt to legally buy a gun. Allowing anyone to download and manufacture their own gun circumvents that process, he said. But Wilson told Ars it may be too late, as the files went up last Friday evening -- days before he said he would resume publishing them on August 1.

Lockheed Martin has finished quality control tests for its largest 3D-printed space part to date: an enormous titanium dome meant to serve as caps for satellite fuel tanks. The component measures four feet in diameter. Engadget reports: Its previous largest qualified space part is an electronics enclosure that's around the size of a toaster. This dome is large enough to seal fuel tanks bigger than humans and, according to Lockheed Martin, big enough to hold 74.4 gallons of coffee or 530 donuts. Glazed, of course.

Titanium is an ideal material for the industry, because it's lightweight and can withstand the harsh conditions of space travel. However, manufacturers end up wasting 80 percent of the material using traditional manufacturing techniques -- plus, each component could take years to build. Rick Ambrose, the company's executive VP, said they were able to cut down the total delivery timeline for a titanium fuel tank dome from two years to an incredibly impressive three months. "Our largest 3D-printed parts to date show we're committed to a future where we produce satellites twice as fast and at half the cost."

You asked questions, we've got the answers!

Christine Peterson is a long-time futurist who co-founded the nanotech advocacy group the Foresight Institute in 1986. One of her favorite tasks has been contacting the winners of the institute's annual Feynman Prize in Nanotechnology, but she also coined the term "Open Source software" for that famous promotion strategy meeting in 1998.

Christine took some time to answer questions from Slashdot readers.

He Who Has No Name writes: Those who remember Cody Wilson and Defense Distributed -- the self-described cryptoanarchist and his organization that published plans for 3D printable firearm parts, respectively -- also remember that not long after the plans for the printable Liberator single-shot pistol hit the web, the Department of State seized the Defense Distributed website and prohibited Wilson from publishing 3D printable firearm plans, claiming violations of ITAR -- the International Traffic in Arms Regulation, a U.S. law taxing and restricting the distribution of a wide variety of physical goods listed as having military value. Slashdot covered the website seizure here (the Department of Defense was initially misreported in sources to have been the agency responsible).

In both a First and Second Amendment win, the Second Amendment Foundation has settled with the Department of State after suing on behalf of Defense Distributed. Slashdot reader schwit1 shares an excerpt from the report: "Under terms of the settlement, the government has agreed to waive its prior restraint against the plaintiffs, allowing them to freely publish the 3-D files and other information at issue. The government has also agreed to pay a significant portion of the plaintiffs' attorney's fees, and to return $10,000 in State Department registration dues paid by Defense Distributed as a result of the prior restraint. Significantly, the government expressly acknowledges that non-automatic firearms up to .50-caliber -- including modern semi-auto sporting rifles such as the popular AR-15 and similar firearms -- are not inherently military."

United Therapeutics, a startup that sells drugs to treat lung ailments, plans to use a 3-D printer to manufacture human lungs in "unlimited quantities." Bioprinting isn't a new idea. 3-D printers can make human skin, even retinas. Yet the method has been limited to tissues that are very small or very thin and lack blood vessels. From a report: United instead is developing a printer that it believes will be able, within a few years, to manufacture a solid, rubbery outline of a lung in exquisite detail, including all 23 descending branches of the airway, the gas-exchanging alveoli, and a delicate network of capillaries. A lung made from collagen won't help anyone: it's to a real lung what a rubber chicken is to an actual hen. So United is also developing ways to impregnate the matrix with human cells so they'll attach and burrow into it, bringing it alive.

[...] United has already made some risky organ bets. One of its subsidiaries, Revivicor, supplies surgeons with hearts, kidneys, and lungs from genetically engineered pigs (these have been used in baboons, so far). Another, Lung Bioengineering, refurbishes lungs from human donors by pumping warm solution into them. About 250 people have already received lungs that would otherwise have been designated medical waste. Don't expect fully manufactured organs soon. United, in its company projections, predicts it won't happen for another 12 years. United CEO Martine Rothblatt acknowledges that the printed structure I saw is just a start. "It's only two branches and no cells," she says.

Since there aren't enough construction workers in the country to keep up with housing demands, the city of Eindhoven in The Netherlands is turning to robots for help. The city will soon boast the world's first commercially-developed 3D-printed homes, a endeavor known as Project Milestone. The project is being handled by Dutch construction company Van Wijnen and researchers from Eindhoven University of Technology. Quartz reports: Construction on the first home begins this year and five houses will be on the rental market by 2019, project organizers say. Within a week of releasing images of the new homes, 20 families expressed interest in dwelling in these postmodern pods, according to the project website. the project website. "The first aim of the project is to build five great houses that are comfortable to live in and will have happy occupants," developers say. Beyond that, they hope to promote 3D concrete printing science and technology so that printed housing "will soon be a reality that is widely adopted."

The "printer" in this case is a big robotic arm that will shape cement of a light, whipped-cream consistency, based on an architect's design. The cement is layered for strength. The project developers say that the consistency of this concrete and the precision of the printer will make it possible to mix and use only as much cement as is needed, which makes it environmentally-friendly and less expensive than classic construction methods. The printer and unique cement will also allow them to create unusual forms that challenge conventional notions of home design.

Researchers have unveiled what they billed as the world's first 3D-printed house to serve as a home in the French city of Nantes, with the first tenants due to move in by June. From a report: Academics at the University of Nantes who led the project said it was the first house built in situ for human habitation using a robot 3D-printer. The robot, known as BatiPrint3D, uses a special polymer material that should keep the building insulated effectively for a century. It took BatiPrint3D around 18 days to complete its part of the work on the house - creating hollow walls that were subsequently filled with concrete for insulation. The 95 square meter (1000 square feet), five-room house will be allocated to a local family which qualifies for social housing, authorities said.

Researchers at Lawrence Berkeley National Lab have successfully printed three-dimensional structures composed entirely of liquids. A special nanoparticle-derived coating can lock water in place for several months in a solution of silicone oil. omaha393 writes: Using a modified 3D printer, the team demonstrated they can reliably print liquid tubes sheathed in surfactants with precision that allows spiral and branching shapes with diameters ranging from micrometers to millimetres. The technique offers a means to finely control small scale synthetic reactions but the team suggest it could lead to wearable, stretchable electronics. A brief video showing the technology is available and the full paper is available at Advanced Materials.

dryriver writes: Before I ask my question, there already is free and open-source software (FOSS) for wind turbine design and simulation called QBlade. It lets you calculate turbine blade performance using nothing more than a computer and appears compatible with Xfoil as well. But consider this: the ultimate, most efficient and most real-world usable and widely deployable wind turbine rotor may not have traditional "blades" or "foils" at all, but may be a non-propeller-like, complex and possibly rather strange looking three-dimensional rotor of the sort that only a 3D printer could prototype easily. It may be on a vertical or horizontal axis. It may have air flowing through canals in its non-traditional structure, rather than just around it. Nobody really knows what this "ultimate wind turbine rotor" may look like.

The easiest way to find such a rotor might be through machine-learning. You get an algorithm to create complex non-traditional 3D rotor shapes, simulate their behavior in wind, and then mutate the design, simulate again, and get a machine learning algorithm to learn what sort of mutations lead to a better performing 3D rotor. In theory, enough iterations -- perhaps millions or more -- should eventually lead to the "ultimate rotor" or something closer to it than what is used in wind turbines today. Is this something FOSS developers could tackle, or is this task too complex for non-commercial software? The real world impact of such a FOSS project could be that far better wind turbines can be designed, manufactured and deployed than currently exist, and the fight against climate change becomes more effective; the better your wind turbines perform, and the more usable they are, the more of a fighting chance humanity has to do something against climate change. Could FOSS achieve this?

When rockets can no longer hold oversize payloads, building in space might be the best way to go. Popular Mechanics: Headquartered in Mountain View, California, Made In Space is working to make that dream a reality. For the past few years, they've operated the Additive Manufacturing Facility, one of the only 3D printers in space. While the AMF sits comfortably aboard the International Space Station, Made In Space has plans to launch a new printer that would operate exclusively in the vacuum of space. Their prototype, called Archinaut, is scheduled to launch later this year. Future machines like Archinaut will be able to print nearly everything in orbit -- where there's no limit on size. "We can manufacture a structure that couldn't support its own mass if it were on Earth," says Made In Space CEO Andrew Rush. "The only practical limitation you have is how much material you're providing to the system." The first Archinaut prototype is mostly just a proof-of-concept and won't be constructing mile-wide satellites anytime soon. "First you crawl, then you walk, then you run," says Rush. "We'll start out with manufacturing space-optimized trusses and booms and reflectors to provide a supply capability that we can't currently achieve." But once this tech gets off the ground, it can be used to build structures as big as their owners want them.

New York Times CEO Mark Thompson believes that the newspaper printing presses may have another decade of life in them, but not much more. "I believe at least 10 years is what we can see in the U.S. for our print products," Thompson said on "Power Lunch." He said he'd like to have the print edition "survive and thrive as long as it can," but admitted it might face an expiration date. "We'll decide that simply on economics," he said. "There may come a point when the economics of [the print paper] no longer make sense for us. The key thing for us is that we're pivoting. Our plan is to go on serving our loyal print subscribers as long as we can. But meanwhile to build up the digital business, so that we have a successful growing company and a successful news operation long after print is gone." CNBC reports: Digital subscriptions, in fact, may be what's keeping the New York Times afloat for a new generation of readers. While Thompson said the number of print subscribers is relatively constant, "with a little bit of a decline every time," the company said last week that it added 157,000 digital subscribers in the fourth quarter of 2017. The majority were new subscribers, but that number also included cooking and crossword subscriptions. Revenue from digital subscriptions increased more than 51 percent in the quarter compared with a year earlier. Overall subscription revenue increased 19.2 percent. Meanwhile, the company's fourth-quarter earnings and revenue beat analysts expectations, "even though the print side of the business is still somewhat challenged," Thompson said. Total revenue rose 10 percent from a year earlier to $484.1 million. New York Times' shares have risen more than 20 percent this year. "Without question we make more money on a print subscriber," Thompson added. "But the point about digital is that we believe we can grow many, many more of them. We've already got more digital than print subscribers. Digital is growing very rapidly. Ultimately, there will be many times the number of digital subscribers compared to print."

Porsche Classic, Porsche's classic cars division, has turned to 3D printing obscure parts that people might need on occasion. From a report: They already have about 52,000 parts available, but for the truly arcane ones, it's cheaper to 3D print them than make the specialized tools to create them over again. In addition to that 959 lever, Porsche is also 3D printing eight other parts. They are made from steel and alloy and the plastics are made using an selective laser sintering printer, which Porsche describes as: "A process where the material is heated to just below melting point and the remaining energy is applied through a laser to fuse the plastic powder at a selected point." So there you have it! The next time something is busted on your 959 or 356, don't cry and abandon the car, stalled on the side of the road. Call up Porsche. They'll science something for you.

A trivial problem reveals the limits of technology. Fascinating story from The New Yorker: Unsurprisingly, the engineers who specialize in paper jams see them differently. Engineers tend to work in narrow subspecialties, but solving a jam requires knowledge of physics, chemistry, mechanical engineering, computer programming, and interface design. "It's the ultimate challenge," Ruiz said.

"I wouldn't characterize it as annoying," Vicki Warner, who leads a team of printer engineers at Xerox, said of discovering a new kind of paper jam. "I would characterize it as almost exciting." When she graduated from the Rochester Institute of Technology, in 2006, her friends took jobs in trendy fields, such as automotive design. During her interview at Xerox, however, another engineer showed her the inside of a printing press. All Xerox printers look basically the same: a million-dollar printing press is like an office copier, but twenty-four feet long and eight feet high. Warner watched as the heavy, pale-gray double doors swung open to reveal a steampunk wonderland of gears, wheels, conveyor belts, and circuit boards. As in an office copier, green plastic handles offer access to the "paper path" -- the winding route, from "feeder" to "stacker," along which sheets of paper are shocked and soaked, curled and decurled, vacuumed and superheated. "Printers are essentially paper torture chambers," Warner said, smiling behind her glasses. "I thought, This is the coolest thing I've ever seen."

sciencehabit shares a report from Science Magazine: Forget those long lines at the pharmacy: Someday soon, you might be making your own medicines at home. That's because researchers have tailored a 3D printer to synthesize pharmaceuticals and other chemicals from simple, widely available starting compounds fed into a series of water bottle -- size reactors. The work, they say, could digitize chemistry, allowing users to synthesize almost any compound anywhere in the world.

In today's issue of Science, Leroy Cronin, a chemist at the University of Glasgow in the United Kingdom, and his colleagues report printing a series of interconnected reaction vessels that carry out four different chemical reactions involving 12 separate steps, from filtering to evaporating different solutions. By adding different reagents and solvents at the right times and in a precise order, they were able to convert simple, widely available starting compounds into a muscle relaxant called baclofen. And by designing reactionware to carry out different chemical reactions with different reagents, they produced other medicines, including an anticonvulsant and a drug to fight ulcers and acid reflux. So why not just buy a reactionware kit and scrap the printing? "This approach will allow the on-demand production of chemicals and drugs that are in short supply, hard to make at big facilities, and allow customization to tailor them to the application," Cronin says.

shanen writes: How many of you don't print much these days? What is the best solution to only printing a few pages every once in a while? Here are some dimensions of the problem...

Inexpensive printers: The cost of new printers is quite low, but how long can the printer sit there without printing before it dies? Lexmark and HP used to offer an expensive solution with integrated ink cartridges that also included new print heads, but... Should I just buy a cheap Canon or Epson and plan to throw it away in a couple of years, probably after printing less than a 100 pages?

Printing services: They're mostly focused on photos, but there are companies where you can take your data for printing. My main concerns here are actually with the costs and the tweaks. Each print is expensive because you are covering their overhead way beyond the cost of the printing itself. Also, most of the time my first print or three isn't exactly what I want. It rarely comes out perfectly on paper the first time.

Social printing: For example, are any of you sharing one printer with your neighbors via Wi-Fi? Do you just sneak a bit of personal printing onto a printer at your office? Do you travel across town to borrow your brother-in-law's printer?

Hewlett Packard Enterprise's Meg Whitman is stepping down as chief executive officer. Reuters reports: Whitman engineered the biggest breakup in corporate history during her 6 year tenure at the helm, creating HPE and PC-and-printer business HP Inc from parent Hewlett Packard Co in 2015. Whitman will be succeeded by the company's president, Antonio Neri, who takes over from Feb. 1. "Now is the right time for Antonio and a new generation of leaders to take the reins of HPE," Whitman said in a statement. Whitman, who will continue as a board member, had been steering the company towards areas such as networking, storage and technology services.

sciencehabit writes: Researchers have come up with a way to 3D print tough and flexible stainless steel, an advance that could lead to faster and cheaper ways to make everything from rocket engines to parts for nuclear reactors and oil rigs. The team designed a computer-controlled process to not only create dense stainless steel layers, but to more tightly control the structure of their material from the nanoscale to micron scale. That allows the printer to build in tiny cell wall-like structures on each scale that prevent fractures and other common problems. Tests showed that under certain conditions the final 3D printed stainless steels were up to three times stronger than steels made by conventional techniques and yet still ductile.
The work was done using a commercially-available 3D printer, according to Science magazine. "That makes it likely that other groups will be able to quickly follow their lead to make a wide array of high-strength stainless steel parts for everything from fuel tanks in airplanes to pressure tubes in nuclear power plants."

Lance Ulanoff, writing for Mashable: Somewhere, 254 miles above us, an astronaut is probably printing something. Ever since the International Space Station (ISS) welcomed its first residents in November of 2000, there have been printers on board. Astronauts use them to print out critical mission information, emergency evacuation procedures and, sometimes, photos from home. According to NASA, they print roughly 1,000 pages a month on two printers; one is installed on the U.S. side of the ISS, the other in the Russian segment. ISS residents do all this on 20-year-old technology. "When the printer was new, it was like 2000-era tech and we had 2000-era laptop computers. Everything worked pretty good," recalled NASA Astronaut Don Pettit, who brought the first printer up to the ISS. But "the printer's been problematic for the last five or six years," said Pettit who's spent a total of one year on the station. It's not that the Space Station has been orbiting with the same printer since Justin Timberlake was still N'Sync. NASA had dozens of this printer and, as one failed, they'd send up another identical model. But now it's time for something truly new. In 2018, NASA will send two brand new, specialized printers up to the station. However, figuring out the right kind of printer to send was a lot more complicated than you'd probably expect. NASA has turned to HP for its IT supply and needs. The agency requires the following things in its printer: print and handle paper management in zero gravity, handle ink waste during printing, be flame retardant, and be power efficient. HP, Mashable reports, has recommended the HP Envy 5600, its all-in-one (printer, scanner, copier, fax) device that retails for $129.99. The model has been modified, according to the report.